Synchronous motors are specially designed for constant voltage transmission, called synchronous phase modifiers. advantage & disadvantage
Effects of line constants: For long transmission lines with lengths above 150 km and transmission voltages (100 kV) above 100 kV, it is assumed during line calculations that the distributed capacitances are not concentrated at one or more…
Rigorous Method The figure below shows a phase and neutral connection of a three-phase line with uniformly distributed impedance and shunt admittance.
when two or more conductors come into contact together while operating at a normal voltage difference, an electrical fault is said to have occurred.
In that method the total resistance and capacitance of the medium transmission line is shown as half at the supply end and the other half at the receiving end.
The Equation for Sending End Voltage and Current by End Condenser Method of Medium Transmission Line
In the end condenser method, the total capacitance of the line is captured at the consolidated state at the end of the line. The response of the other two constants of the line, resistance, and inductive reactance, is reflected with respect
Is the constant of the transmission line; Resistance, inductance and capacitance. All lines of the medium transmission line are considered constant. That is, along with the resistance and inductance of the line, the capacitance is also…